Loading ...
Loading ...
Loading ...
14
To connect DS3801W to a Wi-Fi router
manually, you need access to DS3801W’s
its internal Wi-Fi settings. To do so, you need a
Wi-Fi enabled device with an Internet browser
for temporary Wi-Fi connection to DS3801W.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.
Follow the sequence below for connection of
DS3801W to a non-WPS Wi-Fi router.
1 Collect settings of your home Wi-Fi router
and write down on paper for use during
DS3801W Wi-Fi setup (see ‘Collect
settings of your home Wi-Fi router’ on
page 15).
2 Switch DS3801W to Assisted Wi-Fi Setup
mode (see ‘Switch DS3801W to Assisted
Wi-Fi Setup mode’ on page 15).
» A new Wi-Fi network created by
DS3801W will appear, with the
network name (SSID) of Philips Fidelio
AirPlay.
3 Connect your Wi-Fi enabled device to the
created new Wi-Fi network temporarily
(see ‘Connect your Wi-Fi enabled device to
the newly created Wi-Fi network’ on page
16).
4 Open the built-in web page of DS3801W
with the Internet Browser of your Wi-Fi
enabled device (see ‘Open the built-in web
page of DS3801W’ on page 17).
5 Change the internal Wi-Fi settings of
DS3801W based on the settings you
wrote on paper at step 1 (see ‘Change the
internal Wi-Fi settings of DS3801W’ on
page 18).
6 Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
‘Restore your Wi-Fi enabled device back to
your existing home Wi-Fi setting’ on page
19).
» DS3801W is connected to your home
Wi-Fi network successfully.
Tip
For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
If the Wi-Fi SETUP indicator on DS3801W blinks
yellow, it means that the Wi-Fi connection has failed.
Please wait for 2 minutes and try again. If the problem
remains, try to set up the Wi-Fi connection manually
(see ‘Scenario 2: Connect to a non-WPS router’ on
page 14).
If the Wi-Fi connection fails again, press and hold both
the + and - buttons on the top of DS3801W to reset
it, and then try again.
Scenario 2: Connect to a
non-WPS router
Note
You can also follow the procedures below to connect
DS3801W to a WPS router manually.
EN
Loading ...
Loading ...
Loading ...