Loading ...
Loading ...
Loading ...
24
Environment protection first!
i Your appliance contains valuable materials which can be recovered or recycled.
ÜLeave it at a local civic waste collection point.
ACTIFRY
PROBLEMS CAUSES SOLUTIONS
The appliance does not
work
The appliance is not correctly plugged in. Check that the appliance is correctly
plugged in.
You have not yet pressed the On/Off
button.
Press the On/Off button.
You have pressed the On/Off button but
the appliance still doesn’t work.
Close the lid.
The appliance does not heat up. Take the appliance to an approved ser-
vice centre.
The chips are not crispy
enough
You have not followed the recommended
cooking time.
Leave the chips to cook for another few
minutes. Refer to the cooking table.
You are not using potatoes suitable for
chips.
Choose a variety of potato recom-
mended for chips.
The potatoes are not sufficiently washed
and dried.
Wash the potatoes for a long time to
remove excess starch, then drain and
dry them before cooking. They must be
completely dry.
The chips are too thick. Cut the chips thinner. The maximum
chips dimensions are 13mm x 13 mm.
There is not enough oil for the amount of
fresh chips being cooked.
Increase the amount of oil (refer to the
cooking table).
The food is not cooked
evenly all over
The food has been cut in different shapes
and sizes.
Cut the food so it is all the same size.
You have not used the paddle. Insert the paddle.
The paddle is in place but it does not turn. Reposition the paddle until it clicks. If
the problem persists, take the appliance
to an approved service centre.
Cooking liquids have
flowed into the base of
the appliance.
The maximum level has been exceeded. Observe the maximum level.
The timer does not
work*
The battery is flat.* Change the battery. *
The LCD screen is not
working.*
The appliance is not plugged in. Plug the appliance in.
The lid is open. Close the lid all the way.
The appliance has not been switched on. Press the On/Off button.
Following a malfunction in the use of the
product, it has gone into safety mode.
Take the appliance to an approved ser-
vice centre.
The LCD screen dis-
plays E.*
There is a fault in the operation of the
appliance.
Unplug the appliance, wait 10 seconds,
reconnect the appliance, press the On/
Off button. If the LCD screen still dis-
plays E, see the table of error codes.
The appliance is abnor-
mally noisy.
You suspect a malfunction in the opera-
tion of the appliance motors.
Take the appliance to an approved ser-
vice centre.
* Depending on model
Loading ...
Loading ...
Loading ...