Loading ...
Loading ...
Loading ...
3. Switch on the low beam headlamps
and open the hood.
E142465
4. On the wall or screen you will observe
a flat zone of high intensity light
located at the top of the beam pattern.
If the top edge of the flat zone of high
intensity light is not on the horizontal
reference line, adjust the aim of the
headlamp beam.
E292172
5. Use a suitable tool, for example a
screwdriver or socket wrench, to turn
the adjuster clockwise or
counterclockwise to adjust the vertical
aim of the headlamp. The horizontal
edge of the brighter light should touch
the horizontal reference line.
6. Close the hood and switch off the
lamps.
CHANGING A BULB
WARNING: Switch the lamps and
the ignition off. Failure to do so could
result in serious personal injury.
WARNING: Bulbs can become hot.
Let the bulb cool down before removing
it. Failure to do so could result in
personal injury.
Use the correct specification bulb. See
Bulb Specification Chart (page 302).
Install in the reverse order unless otherwise
stated.
Rear Direction Indicator and
Reversing Lamp
E292168
1. Switch all of the lamps and the ignition
off.
2. Use a suitable tool, for example a
screwdriver, to carefully remove the
access cover.
3. Remove the side cover.
232
Explorer (CTW) Canada/United States of America, Police, enUSA, Edition date: 201902, First-Printing
Maintenance
Loading ...
Loading ...
Loading ...