Loading ...
Loading ...
Loading ...
9
1. On / O Switch:
The On / Off (or Power) Switch is located on the lower right-hand side
of the machine. The On / Off Switch controls the power to the machine.
BEFORE moving the On / Off Switch to the On (I) position, make sure
the marker on the Variable Speed Dial is pointed at the Stop Symbol (
)
at the top of the dial.
After plugging in the unit, move the On / Off Switch to the On position to
ready the machine for blending. Move the On / Off Switch to the Off position
at night and whenever the machine will be left unattended.
If the On / Off switch is moved to the Off position to stop a program mid-cycle,
wait 30 seconds for power to recycle and the timer to reset before moving the
On / Off switch to the On position.
When the Pulse and Start / Stop Symbols brighten, the On / Off Switch is in the
On position and power is flowing.
2. Start (
) / Stop ( ) Switch:
After the marker on the Variable Speed Dial is rotated off of the Stop Symbol
(
) to either Variable Speed 1 or a Program setting, press the Start / Stop Switch
to start the machine and initiate the blending process. Pressing the Start / Stop
Switch again will stop the blending process.
Programs can be interrupted by pushing down the Start / Stop switch at any
time. If reactivated by pushing down the Start / Stop switch, the program will
start at the beginning.
3. Pulse Switch (
):
Variable Speed: Pressing down on the Pulse Switch will cause the machine to
blend at the speed setting shown on Variable Speed Dial for as long as the
Pulse Switch is held down.
Programs: The Pulse function can be used when a program is selected. Pushing
down the Pulse switch when a program is selected will cause the machine to
run at 50% of high power for as long as the Pulse switch is pushed down.
CONTROL PANEL
OFF
ON
1
23
5
4
CONTROL PANEL
Control Panel continues on page 10
Loading ...
Loading ...
Loading ...