Loading ...
Loading ...
Loading ...
16 electrolux.com.au
IMPORTANT
Handle the glass carefully, taking care not to strike
the edges of the glass.
5. Remove the double insulated insert.
6. Clean the frame assembly, glass and double
insulated insert using a soft cloth and mild detergent
in warm water. Dry using a soft cloth.
Freezer shelf
Remove the freezer shelf by lifting the catches on the right
and left underside of the shelf to release the shelf then
pull the shelf toward you.
Drawers fitted with telescopic slides
To remove the drawer for cleaning.
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed
back so they are fully closed.
WARNING
Never close the door while the telescopic slides
are extended. This may damage the slide and/
or refrigerator or cause the slide to become
disengaged from the refrigerator.
To replace the drawer:
1. Ensure the telescopic slides are pushed in all the way.
2. Slide the drawer into place over the slides and push
the bin in until it stops.
3. Drop drawer into position.
Door bin mats
The door bin mats prevent items placed in the bins from
sliding around, catch small spills in the door bins and allow
small spills to be cleaned up by simply putting the mats in
the dishwasher.
The mats are constructed from food-grade silicon and are
dishwasher safe.
To remove the door bin mats, pull on the tab and lift
vertically from the door bin. To refit, align the mat in the
door bin and push down into place.
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all the
way then lift bin out from the front of the bin. When refitting
insert the rear of the bin first then lower into position.
When replacing the bins after cleaning, we recommend
fitting the lower bin first.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of
the freezer.
NOTE: this is only possible on Top mount models.
1.
Remove the ice bin and ice cube tray. If the ice tray
assembly is frozen to the carriage, simply squeeze
the tray and shelf together to break the ice.
USING YOUR REFRIGERATOR (CONTINUED)
Loading ...
Loading ...
Loading ...