Loading ...
Loading ...
Loading ...
en Automatic safety cut-out
8
4. Touch the + or - symbol until the desired cooking
time appears on the timer display.
The cooking time counts down. If you have set a
cooking time for several hotplates, you can display
each cooking time. To do so, touch the $ to select the
relevant hotplate.
When the time has elapsed
When the cooking time has elapsed, the hotplate
switches off. ‹ lights up in the hotplate display. An
audible signal will sound.‹‹ lights up in the timer
display for 10 seconds. Touch any symbol. The
displays go out and the beep stops.
Changing or cancelling the cooking time
Select the hotplate: Touch the symbol 0 and use the +
or - symbol to change the time or set to ‹‹.
Note: You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 8
Note: You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates.
Select the hotplate. Touch the 0 symbol and use the +
or - symbol to change the cooking time or set to ‹‹.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
■ If a hotplate has been selected, touch the 0 symbol
twice within 10 seconds.
■ If a hotplate has not been selected, touch the 0
symbol.
‹‹ lights up in the timer display. The indicator light next
to the V symbol lights up.
Setting the time
1. Touch the + or - symbol.The default value appears.
+ symbol: 10 minutes
- symbol: 05 minutes
2. Touch the + or - symbol until the desired time
appears on the timer display.
The time counts down.
An audible signal sounds once the time has elapsed.
‹‹ lights up in the timer display for 10 seconds.
Displaying the time
Use the 0 symbol to select the kitchen timer. The time
is displayed for 10 seconds.
Setting the correct time
Use the 0 symbol to select the kitchen timer and reset
the time.
bAutomatic safety cut-out
Au t o mat i c saf et y cut - out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating. ”‰ and the •/œ residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
QBasic settings
Ba s i c set t i ngs
Your appliance has various basic settings. You can
adapt these settings to suit your own needs.
Display Function
™‚
Automatic child safety lock
‹
Switched off.*
‚
Switched on.
ƒ
Manual and automatic child safety lock switched off.
™ƒ
Audible signal
‹
Confirmation signal and operating error signal are
switched off (main switch signal always remains).
‚
Only the operating error signal is switched on.
ƒ
Only the confirmation signal is switched on.
„
Confirmation signal and operating error signal switched
on.*
™†
Automatic timer
‹‹
Switched off.*
‹‚-ŠŠ
Cooking time, after which the hotplates switch off.
™‡
Duration of the timer end signal
‚
10 seconds.*
ƒ
30 seconds
„
1 minute.
*Basic setting
Loading ...
Loading ...
Loading ...