Loading ...
Loading ...
Loading ...
16
IMPORTANT
Your ice maker is turned on at the factory so it can work
as soon as you install your refrigerator. If you cannot
connect a water supply, set the ice maker’s On/Off icon to
Off and turn off the water supply valve; otherwise, the ice
maker’sllvalvemaymakealoudchatteringnoisewhen
it attempts to operate without water.
IMPORTANT
On occasion, unusually small ice cubes may be noticed in
the bucket or in dispensed ice. This could occur in normal
operation of the ice maker. If you start seeing these more
frequently, it may be an indication of low water pressure
orthewaterlterneedstobereplaced.Asthewaterlter
nears the end of its useful life and becomes clogged with
particles, less water is delivered to the ice maker during
each cycle. Remember, if it’s been six (6) months or longer
sinceyoulastchangedyourwaterlter,replacethewater
lterwithanewone.Poorqualityhouseholdwatermay
requiretheltertobechangedmorefrequently.
IMPORTANT
Turning off the ice maker will result in existing ice melting
in the bin.
IMPORTANT
Turning off the ice maker will disable the ice dispenser.
You will still be able to dispense water.
AUTOMATIC ICE & WATER DISPENSER
NOTE
The water dispenser has a built-in device that shuts off the
waterowafterthree(3)minutesofcontinuoususe.Toreset
this shutoff device, simply release the dispenser paddle.
NOTE
The ice maker also has a built-in plastic signal arm that
automatically stops ice production when the ice bin is full. This
signal arm should not be used to manually stop the ice maker.
CAUTION
For proper dispenser operation, recommended water
supply pressure should fall between 30 psi and 100 psi.
Excessivepressuremaycausewaterltertomalfunction.
Priming the water supply system
1 Beginllingthetankbypressingandholdinga
drinking glass against the water dispenser paddle.
2 Keep the glass in this position until water comes out
of the dispenser. It
may take about 1½
minutes.
3 Continue dispensing
water for about four
(4)minutestoushthe
system and plumbing
connections of any
impurities (stopping
to empty the glass as
necessary).
Ice maker operation & care
After the refrigerator is installed properly and has cooled
for several hours, the ice maker can produce ice within 24
hours.Theicemakerwilllltheicebinfromtherear.You
must dispense some ice to force the ice forward in the bin.
Thiswillallowthebintollcompletely.
Turning the ice maker on and off
Ice production is controlled by the ice maker’s On/Off icon on
the control panel. Press and hold the “Ice Off” icon for three (3)
seconds to turn the ice maker “ON” or “OFF”. The ice maker is
offwhentheLEDabovethe“IceOff”iconisilluminated.
Using the ice maker after installation
Beforemakingiceforthersttime,besuretoprimethe
water supply system. Air in new plumbing lines can result
in two (2) or three (3) empty ice maker cycles. Furthermore,
ifthesystemisnotushed,thersticecubesmaybe
discoloredorhaveanoddavor.
Loading ...
Loading ...
Loading ...