Loading ...
Loading ...
Loading ...
9
Options
Clock/Options allows access to the microwave settings.
To Use:
1. Touch CLOCK/OPTIONS. The microwave oven display will
scroll through the various options.
You can also touch CLOCK/OPTIONS repeatedly to manually
scroll through the list of options.
2. Touch the number keypad for the specic option to toggle the
function setup.
Clock
The clock is a 12 hour (12:00-11:59) or 24 hour (0:00-23:59) clock.
Touch CLOCK/OPTIONS to reach Clock submenu and follow the
prompts to set the clock. Clock format (12 hours with AM and PM,
or 24 hours) may also be set in the Clock submenu.
Vent Fan
Various speeds ranging from high to low and off. Comes on
automatically as cooling fan during any cook function.
30 Minute Fan Timer: Set vent fan to run for exactly 30 minutes or
to run for only 30 minutes more (off after 30 minutes). The vent fan
may be turned off at any time using the Vent Fan Control. Touch
OPTION/CLOCK to reach the 30 Minute Fan Timer submenu and
select the setting.
Auto Vent Fan (on some models): To keep the microwave oven
from overheating, the auto vent fan will automatically turn on at
high speed if the temperature from the range or cooktop below
the microwave oven gets too hot. When this occurs, the vent fan
cannot be turned off. “Auto FAN ON for heat circulation” appears
in the display.
Dymamic Fan Sensing (on some models): To keep the
microwave oven from overheating, the auto vent fan will
automatically turn on at various speeds, depending on the
temperature from the range or cooktop below the microwave
oven. When this occurs, the vent fan cannot be turned off.
“AUTO FAN Sensor Technology for heat circulation” appears in
the display. As the temperature cools, the fan will automatically
decrease its speed, then turn off.
Light Timer
Set the cooktop light to turn on and off at certain times. Touch
CLOCK/OPTIONS to reach the Light Timer submenu, and follow
the prompts to set the light on time and light off time in hours and
minutes or to cancel Light Timer.
NOTE: Light Timer uses 12 hour clock only.
Filter Alert
Reset the lter status after replacing and/or cleaning the lters.
Touch CLOCK/OPTIONS to reach the Filter Alert submenu, and
activate reset.
Sound (Tones)
Programming tones may be turned off or all tones (including end-
of-function signals) may be turned off. Touch CLOCK/OPTIONS to
reach the Sound submenu, and then follow the prompts to turn off
or on the programming tones or all tones.
Scroll Speed
Scroll speed of the text may be adjusted. Touch CLOCK/OPTIONS
to reach the Scroll Speed submenu and follow the prompts to set
speed.
Demo Mode
Activate to practice using the control without actually turning on
the magnetron. Touch CLOCK/OPTIONS to reach the Demo mode
submenu, then follow the prompts to activate. The Demo icon will
light up in the display. Repeat to deactivate.
Energy Save
To conserve energy, the Clock will automatically turn off when
the microwave oven goes into Standby mode. Touch CLOCK/
OPTIONS to reach the Clock and Energy Save submenu, and
follow the prompts to turn on Clock.
Language (on some models)
Language of the display text may be changed. Touch CLOCK/
OPTIONS to reach the Language submenu and follow the prompts
to set language to English or French.
Factory Reset
User may set microwave oven back to default state.
Turntable
NOTE: By touching the Turntable keypad, it is possible to switch
the turntable on and off during manual cooking cycles. This is
helpful when cooking with plates that are bigger than the turntable
or when cooking with plates side by side.
The turntable rotates in both directions to help cook food more
evenly. Do not operate the microwave oven without having the
turntable in place. See the “Accessories” section to reorder any of
the parts.
The raised, curved lines in the center of the turntable bottom t
between the three spokes of the hub. The hub turns the turntable
during microwave oven use. The rollers on the support should t
inside the turntable bottom ridge.
Control Lock
The Control Lock shuts down the control panel keypads to avoid
unintended use of the microwave oven. The Control Lock will
remain set after a power failure, if set before the power failure
occurs.
When the control is locked, only the fan and light will function.
The Control Lock is preset unlocked, but can be locked.
To Lock Control: Touch CANCEL for approximately 3 seconds,
until two tones sound and a lock icon appears in the display.
To Unlock Control: Repeat to unlock. Two tones will sound and
the lock icon will be removed.
A
B
C
A. Turntable
B. Support and rollers
C. Hub
Loading ...
Loading ...
Loading ...