Loading ...
Loading ...
Loading ...
41
BEFORE CALLING FOR SERVICE
(CONT.)
Problem Possible Causes Solutions
The dispenser
will not dispense
ice.
Sound of ice
dropping.
Sound of water
trickling.
Lights do not work
Other
• The ice storage bin is empty.
• The household water line
valve is not open.
• The refrigerator or freezer
door is not closed.
• Ice has melted and frozen
around the auger due to
infrequent use, temperature
fluctuations, and/or power
outages.
• Ice cubes are jammed
between the icemaker arm
and the back of the bin.
• Ice cubes are frozen
together.
• Ice cubes that have been
purchased or made in some
other way have been used in
the dispenser.
• Water input tube is bent.
• Filter is old or needs
changing
• A batch of ice has been
released into the ice bin.
• The icemaker is being
supplied with water.
• The power supply cord is
unplugged.
• Light bulb is loose in the socket.
• Light bulb has burned out.
• Door is left open for seven
continuous minutes.
Please thoroughly read the Automatic Icemaker and Operating the Dispenser sections in
this manual.
• When the first supply of ice is dropped into the
bin, the dispenser should operate.
• Open the household water line valve and allow
sufficient time for ice to be made. When ice is
made, the dispenser should operate.
• Be sure both of the doors are closed.
• Remove the ice storage bin and thaw the
contents.
Clean the bin, wipe it dry, and replace it in its
proper position. When new ice is made, the
dispenser should operate.
• Remove the ice cubes that are jamming the
dispenser.
• Use the dispenser often to prevent the cubes from
freezing together.
• Only the ice cubes made by the icemaker should
be used with the dispenser.
• Check the installed tube
• Replace with a new filter.
• This sound is made when automatically made ice
is dropped into the ice storage bin. The volume
may vary according to the location of the
refrigerator.
• This sound is normally made when the icemaker
is supplied with water after dropping the
automatically made ice.
• If this sound lasts more than 10 seconds, check
for a leak.
• Firmly plug the cord into a live outlet with proper
voltage.
• Turn the refrigerator control to the OFF position and
unplug the refrigerator. Gently remove the bulb and
reinsert. Then plug in refrigerator and reset the
refrigerator control.
• Replace with an appliance bulb of the same wattage, size
and shape available at your local hardware store. (See
the Light Bulb Replacement section on page 36.) Turn
the temperature control to the OFF position and unplug
the refrigerator prior to replacement.
• Shutting door for one second will light bulbs to come
back on.
Loading ...
Loading ...
Loading ...