Loading ...
Loading ...
Loading ...
AUTO STAND-BY OPTION
The AUTO Stand-by function automatically
deactivates the appliance to decrease the energy
consumption when:
• You do not use the appliance for 5 minutes
before you press .
Press the button to activate the appliance
again.
• After 5 minutes from the end of the washing
programme
Press the button to activate the appliance
again.
The display shows the end of the last set
programme.
Turn the programme knob to set a new cycle.
If you set a programme or an option
that ends with water in the drum, the
AUTO Stand-by function doesn't
deactivate the appliance to remind
you to drain the water.
DAILY USE - DRYING ONLY
WARNING! Refer to Safety chapters.
This appliance is an automatic washer
dryer.
DRYING SETTING
WARNING! Make sure that the
water tap is open.
1. Press On/Off for some seconds to activate the
appliance.
2. Load the laundry one item at a time.
3. Turn the programme dial to the programme
applicable for the items to dry. The display
shows the drying indicator
.
To have a good drying performance
do not exceed the maximum drying
loads recommended in the user
manual. Do not set a spin speed
lower than the automatic speed of the
set programme.
DRYING AT AUTOMATIC LEVELS
The laundry can be dried at pre-defined levels of
dryness:
1. Press again and again until the display
shows one of the dryness level indicator:
•
: IRON DRY level indicator for cotton
items
• : CUPBOARD DRY level indicator for
cotton and synthetic items
• : EXTRA DRY level indicator for cotton
items
The display shows a time value, calculated on the
default load size. If the amount of your laundry is
more or less than the default size, the appliance
adjusts automatically the time value during the
cycle.
2. Press to start the programme.
The display shows the door locked indicator .
The drying indicator starts to flash.
You cannot set all dryness levels for
any type of laundry.
TIMED DRYING
The laundry can also be dried with a manual timed
drying:
1. Press again and again to set the time value
(see the «Programmes for timed drying» table).
• The display shows 10 minutes. Each time
you press this touchpad the time value
increases by 5 minutes.
• The display shows the set time value: for
example .
• After some seconds the display shows a
new time value: . The appliance
calculates also the duration of the anti-
crease and the cooling phases.
2. Press to start the programme.
• The display shows regularly a new time
value.
• The drying indicator starts to flash.
• The display shows the door locked
indicator .
17
Loading ...
Loading ...
Loading ...