Loading ...
Loading ...
Loading ...
19
USA
6.5 STARTING THE
PROGRAMME
To start your machine after selecting
the programme and auxiliary functions,
press Start / Pause / Cancel key.
Once the programme starts a tune
is played and the estimated time
remained to the end of the programme
will appear on the Display Information
Line. Start / Pause / Cancel indicator
starts lighting continuously.
C
If the door is opened while
the machine is running, the
machine will switch to the
standby mode. Close the
machine door and press
Start/Pause/Cancel button.
The programme will resume.
C
Your machine performs
water softening depending
on the hardness level of the
supply water. Remaining
time displayed towards the
end in some programmes
can be different from
the time indicated at the
beginning due to this
process. The total time
can also change while
the programme is running
depending on the ambient
temperature where your
machine is installed,
temperature of the supply
water and amount of the
dishes.
that in 1 hour increments up to 24
hours every time you press the key.
4. Press Start / Pause / Cancel key
to start countdown for the Time
Delay. Time Delay indicator and
Start / Pause indicator will light
continuously until the end of the
period. Time Delay is displayed
on the Display Information Line.
Selected programme will start as
soon as the countdown is over.
Changing the settings while Time
Delay function is enabled
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay time.
C
Programme and auxiliary
functions cannot be
set/changed after the
programme has started.
To cancel the Time Delay function
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. When the Start / Pause / Cancel
key is pressed and hold, "3",
"2", "1" appear on the Display
Information Line. Time Delay
indicator will turn off at the end
of the cancellation process and
delaying process is cancelled.
C
You can select and start a
new programme following
the cancellation of Time
Delay function.
C
Time Delay function can not
be set after the programme
starts.
Loading ...
Loading ...
Loading ...