Loading ...
1
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety pre-
cautions should always be followed to reduce the
risk of fire, electric shock and/or injury to persons,
including the following:
1. READ ALL INSTRUCTIONS.
2. Always unplug from outlet when not
in use and before cleaning. Allow to
cool before putting on or taking off
parts and before cleaning the
appliance.
3. Do not touch hot surfaces. Use handles
and knobs.
4. To protect against electric shock, do not
place cord, plug, or base unit in water or
other liquids.
5. This appliance should not be used
by children or individuals with certain
disabilities.
6. Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been dropped
or damaged in any manner. Return appliance
to the nearest Cuisinart
Repair Center for
examination, repair,
or electrical or mechanical adjustment.
7. The use of accessory attachments
not recommended by Cuisinart may
cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table
or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or
electric burner, or in a heated oven.
11. Always fill percolator with water first,
then plug cord into the wall outlet. To
disconnect, turn controls to Off, then remove
plug from wall outlet.
12. Do not use appliance for other than
intended use.
13. WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
REMOVE THE BASE PANEL. NO USER-
SERVICEABLE PARTS ARE INSIDE.
REPAIR SHOULD BE DONE ONLY BY
AUTHORIZED PERSONNEL.
14. Scalding may occur if the lid is removed
during the brewing cycle.
15. Do not operate your appliance in an appliance
garage or under a wall cabinet. When stor-
ing in an appliance garage, always unplug
the unit from the electrical outlet. Not doing
so could create a risk of fire, especially if the
appliance touches the walls of the garage or
the door touches the unit as it closes.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONL
Y
WARNING: RISK OF FIRE
OR ELECTRIC SHOCK
The lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s enclosure
that may be of sufficient magnitude
to constitute a risk of fire or electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Loading ...
Loading ...
Loading ...