Loading ...
Loading ...
Loading ...
29
Consumer Support
Installation Instructions
Troubleshooting Tips
Operating InstructionsSafety Instructions
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device
is re-engaged properly when the range is replaced. Failure to take this precaution could
result in tipping of the range and cause injury.
Care and cleaning of the range. ge.com
Griddle (on some models)
NOTES:
The griddle is to be used over the center
burner only.
Do not clean the griddle in a dishwasher.
Wash with hot, soapy water after each use while
using a sponge or dishcloth.
If oil or food residue is left on the griddle,
further cooking will harden the residue and cause
sticking over time. In this case, use a non-abrasive
cleanser such as Bon Ami
®
or one of the soft
scrub cleansers. Apply with a sponge, Scrunge
®
or other cleaning pad labeled safe for non-
stick pans
Use only plastic, nylon or wooden utensils or
SilverStone
®
kitchen tools to prevent marring
of the coating.
Never use knives or cut food on the griddle.
Wash with hot, soapy water after each use.
Store carefully to prevent scratching.
Griddle Precautions:
If something has spilled under the griddle, it
should be cleaned up as soon as possible to
prevent “baked on” food soil.
Do not allow grease to accumulate under the
griddle as it can be a fire hazard. Clean under the
griddle as soon as it is cool. Clean with hot soapy
water.
Do not place your griddle in the microwave.
Always turn off all surface burners before
removing the griddle. Use caution when handling
a hot griddle.
Sealed Burner Assemblies
Turn all controls OFF before removing the
burner parts.
The round side burner caps and burner
heads can be lifted off, making them easy to
clean. The electrodes are not removable.
The oval center burner head and cap
assembly can be lifted off, making it easy
to clean. The burner electrode is not
removable.
CAUTION: Do not operate the
cooktop without all burner parts and grates in place.
The electrode of the spark igniter
is exposed when the burner head is
removed. When one burner is turned
to LITE, all the burners spark. Do not
attempt to disassemble or clean
around any burner while another
burner is on. An electric shock may
result, which could cause you to
knock over hot cookware.
Side grate
Burner head
Burner cap
Electrode
Electrode
Cooktop
Burner head
and cap
assembly
Center
griddle
Electrode
Loading ...
Loading ...
Loading ...