Loading ...
Loading ...
Loading ...
Installation
9/24EN
Refrigerator / User Guide
3.4. Power connection
A
WARNING: Do not use extension or
multi sockets in power connection.
B
WARNING: Damaged power cable
must be replaced by Authorized
Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
• Our firm will not assume responsibility
for any damages due to usage without
grounding and power connection in
compliance with national regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the refrigerator to a grounded
socket with 110V/6 0 Hz voltage. The plug
mustcomprisea10-16Afuse.
• Donotusemulti-groupplugwithorwithout
extension cable between the wall socket
and the refrigerator.
3.5. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose
(a).
2. Push the water hose downwards firmly
to slip it onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure
it onto the water inlet valve.
C Normally, you are not required to
tighten the union with a tool. However, you can
use a wrench or pliers to tighten the union if
there is a leakage
3.6. Connecting the water
line to the water supply
Connect the water line to a water supply valve.
If a valve is not present or you are not sure,
consult a qualified plumber.
Loading ...
Loading ...
Loading ...