Loading ...
Loading ...
Loading ...
10
5. Plug the power cord into a 230V
or 240V power outlet and switch
on at the power point.
6. With one hand on the motor base
and the other hand holding the
assembled cup, place the cup
inside the motor base by aligning
the three tabs on the cup with the
three slots on the motor base
(See Fig. 5).
Fig. 5
7. To blend, press down and turn the
assembled cup clockwise in the
direction of the “ON” symbol on
the motor base. The cup will lock
inside the motor base and the
blender will operate (See Fig. 6).
Fig. 6
NOTE: The BlitzPro Blender will
not operate unless the three
locking tabs on the cup are
properly fitted into the three
slots on the motor base.
WARNING: Do not
operate the motor
continuously for more
than 30 seconds at a
time. Allow the motor
to rest for 2 minutes
before continuing.
8. When blending is complete, hold
the motor base with one hand
and with the other hand turn the
assembled cup anti-clockwise
in the direction of the ‘OFF’
symbol on the motor base. Lift the
assembled cup upwards from the
motor base to remove.
9. Flip the cup so the blade holder is
at the top (See Fig. 7).
Fig. 7
10. Carefully unscrew and remove
the blending blade holder from
the cup by turning the blade
holder in an anti-clockwise
direction. Avoid touching the
sharp blades.
Using Your Kambrook Blender continued
Loading ...
Loading ...
Loading ...