Loading ...
Loading ...
Loading ...
5
Reversing the door swing
The glass door can be opened from left to right
and vice versa. Should you desire to change
the opening direction, please follow these
instructions.
NOTE
Door reversal is not available for a unit
with control panel on door. The following
operation is only for a unit with control
panel inside the cabinet.
Remarks: These instructions are based on a
unit with right hinge installed already.
To reverse the door from right hinge to left
hinge, you will need the extra hinge kit that
comes packed inside the unit.
Save all removed parts in case of door re-
reversal.
1. While tilting unit back, remove the 2
screws from pivot plate and the bottom
right hinge. (See Figure 1.)
2. Carefully remove the door from the upper
right hinge. Take out the pivot hinge from
the door hinge hole.
3. Unscrew the upper right hinge and bottom
right hinge from the cabinet. (See Figure
2.) Save them for door re-installation.
4. Pull out the 6 plastic caps at the front left
corner of the cabinet and move them all to
the right side. (See Figure 3.)
5. Install the upper left hinge and bottom left
hinge to the left side of the cabinet. Make
sure the screws are tightened. (See Figure
4.)
6. Insert the pivot plate into the bottom
hinge hole of the door. (See Figure 5.)
7. Insert top hinge pin into bushing in top
left hand corner of door then slide pivot
plate onto bottom hinge. Secure with the
two screws from bottom. (See Figure 6.)
Door
Pivot
Plate
Bottom
Right Hinge
Screws
Figure 1
Bottom
Right
Hinge
Upper Right
Hinge
Figure 2
Plastic Caps
(6 pcs)
Figure 3
Upper Left Hinge
Bottom Left Hinge
Figure 4
Pivot Hinge
Figure 5
Screws
(2 pcs)
Bottom Left Hinge
Figure 6
DOOR REVERSAL INSTRUCTIONS
Loading ...
Loading ...
Loading ...