Loading ...
Loading ...
Loading ...
15 16
7. Place a mug or travel cup large enough to hold at least 14 oz of water onto the rubber trivet located
on the base of the InstaCoffee.
8. Plug in the InstaCoffee.
9. Before brewing, double check that mug is secure. Press the brew button. The brew indicator light
will illuminate in red while the InstaCoffee heats up and dispenses the hot coffee.
NOTE: During the last 10 seconds of the brew cycle, you will hear a whirring sound. This is a normal
part of the brewing cycle.
10. After the light has turned off completely, carefully remove filled mug from base.
CAUTION: Mug and coffee will be very hot.
11. Unplug InstaCoffee. Allow InstaCoffee to cool.
12. Always clean the InstaCoffee after every use. Use the directions on page 6 as a thorough guide.
13. NOTE: If used coffee grounds sit in the InstaCoffee or reusable coffee filter for a long time,
they may begin to mold.
1. Insert the empty capsule receptacle into the capsule receptacle holder in the brew chamber.
2. Fill the water tank. Do not exceed the MAX fill line (14 oz).
3. Plug in the InstaCoffee.
4. Place a large mug or travel cup on the base of the InstaCoffee and press the brew button. Do not
remove mug until brew indicator light stops flashing and turns off.
HOW TO USE
1. Ensure rubber trivet is set in place on the InstaCoffee’s base.
2. Press the lid release button to open the lid upward.
CAUTION: When opening the lid and handling the capsule receptacle, be mindful of two small, sharp
puncturing needles located above and below the capsule receptacle that puncture the K-Cup®*
before use.
3. Ensure that the capsule receptacle is inserted properly into the brew chamber: The looped handle
should be positioned on the left. The word “front” and the arrow below it (printed on the inner rim of
the capsule receptacle) should be positioned toward the front.
4. If using a K-Cup®*, insert it into the capsule receptacle.
• If using the reusable coffee filter, spoon desired amount of coffee grounds into coffee filter. Gently
push the coffee filter’s lid closed so it snaps into place. Place filled coffee filter into the capsule
receptacle so that the word “front,” printed on top of the coffee filter lid, aligns with the word
“front” printed on the inner rim of the capsule receptacle.
Tip: Follow coffee package directions for the recommended coffee grounds to water ratio. A
standard cup of coffee typically requires 1 tablespoon of ground coffee.
5. Fill the water tank with no more than 14 oz of filtered water and no less than 6 oz.
NOTE: Water should not pass the 14-oz measurement marking located on the back left wall of the
water tank.
6. Push the lid of the InstaCoffee down until it clicks into place.
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...