GE Monogram ZIR300NPKAII 30" Integrated Column Refrigerator

User Manual - Page 7

For ZIR300NPKAII.

PDF File Manual, 44 pages, Read Online | Download pdf file

ZIR300NPKAII photo
Loading ...
Loading ...
Loading ...
49-60767-1 7
Automatic Icemaker (freezer models)
Column Refrigerator and Freezer Units
Automatic
icemaker
(freezer
models)
Accessing
the icemaker
and ice
storage bin
(freezer
models)
The icemaker is located above the first drawer
of the freezer. The ice bin is in the first drawer.
To remove the ice bin:
Open and fully extend top drawer and lift out
the ice storage bin.
If the ice storage bin will be removed more
than 2 minutes, set the icemaker power switch
to the OFF position to prevent cubes from
falling into the wire drawer. Remember to
switch the icemaker power switch back to the
ON position before replacing the ice storage
bin.
To turn icemaker off :
Remove top wire drawer to access the icmaker
power switch (see Drawer Removal section).
Set the power switch to the OFF position (OFF
or O)
CAUTION
Avoid contact with the moving
parts of the ejector mechanism, or with the
heating element (located on the bottom of the
icemaker) that releases the cubes. Do not place
fingers or hands on the automatic ice making
mechanism while the freezer is plugged in.
A newly-installed freezer may take 12–24
hours to begin making ice.
The icemaker will produce seven cubes per
cycle—approximately 15 cycles in a 24-hour
period, depending on freezer compartment
temperature, room temperature, number of
door openings and other use conditions.
If the freezer is operated before the water
connection is made to the icemaker, set the
power switch to OFF.
When the freezer has been connected to the
water supply, set the power switch to
ON
.
Throw away the first full bucket of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep of
the feeler arm.
When the bin fills to the level of the feeler
arm, the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NOTE: Icemaker works best between 40 and
120 PSI (275-827 kPa) home water pressure.
Icemaker
ON/OFF
switch
Feeler Arm
Feeler Arm
Icemaker
Icemaker
Power
Switch
Power
Switch
(Appearance may vary)
(Appearance may vary)
Loading ...
Loading ...
Loading ...