Loading ...
Loading ...
Loading ...
12
Display “E0”,
“E1”. “E2”,
“E3”, “E4”,
“E5” or “E7”.
“E0”indicates a communication error for
3-zone models.
“E1” or “E2” indicates that the air
temperature sensor has failed.
“E3” or “E4”indicates that the defrost
sensor in the evaporator has failed.
“E5” indicates defrost heater failure.
“E7” indicates door switch failure.
Call for service.
The alarm
sounds and
the
temperature
display
flashes.
Has the appliance door been open for
longer than 60 seconds? If not, then the
temperature has risen higher or fallen
lower than the temperature that has
been set. This could be due to:
The appliance door being opened too
often.
The ventilation opening being covered
or too dusty.
A lengthy interruption to the power
supply.
A large number of bottles has been
added to the unit.
If yes, close the door.
Do not open the door more often than
necessary.
Clear the obstructions and clean off
the dust.
Leave the appliance to work for a
while until the set temperature has
been reached.
The icon “--” is
lit up and
flashing in the
temperature
display.
The display temperature is out of range.
Only temperatures within the range
0~99°F/-9~37°C can be displayed. If
the temperature is not within this
range, the icon “--” will be displayed
instead. This is normal.
CALIFORNIA CARB/SNAP DISCLOSURE for products manufactured after January, 1, 2019:
Retail food refrigeration equipment manufactured after January 1, 2019, designed to store and
display chilled goods for commercial sale, and that use HFC-134a/R134a refrigerant are not for
sale in California.
*This product uses eco-friendly hydrocarbon refrigerant and fully complies with California CARB
regulations. However, we are required by California Law to provide the previous disclosure
statement in every product sold in California.
This product does not use any refrigerants on the “List of Prohibited Substances.”
Loading ...
Loading ...
Loading ...