Loading ...
Loading ...
Loading ...
13
Consumer Support
Troubleshooting Tips
Operating Instructions
Safety Instructions
About cycle options.
NOTE: Not all features are available on all dryer models. ge.com
(Appearance and
features may vary)
SIGNAL
Alerts you that the cycle is complete. The beeper will continue to sound every two
minutes for the next 6 minutes, until the clothes are removed. The clothes should
be removed when the beeper goes off so wrinkles won’t set in.
Press SIGNAL to select low, medium or high volume, or to turn the beeper off.
EXTEND TUMBLE PLUS
Minimizes wrinkles by adding approximately 60 minutes of no-heat tumbling after clothes
are dry. The beeper will sound every 5 minutes to remind you to remove the clothes.
The TIME REMAINING display will show 00.
ANTI-BACTERIAL (on some models)
This option can only be used with the COTTONS or MIXED LOADS cycles. This option
reduces certain types of bacteria by 99.9%, including: Staphylococcus aureus, Pseudomonas
aeruginosa and Klebsiella pneumoniae*. The anti-bacterial process occurs when high heat
is used during a portion of the drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol P154 Sanitization Performance of Residential Clothes Dryers.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
DELAY START (on some models)
Use to delay the start of your dryer.
1. Choose your dry cycle and any options.
2. Press DELAY START. You can change the delay time in 30 minute increments using the
SET TIME arrow pads.
3. Press the START pad to start the countdown.
The countdown time will be shown in the TIME REMAINING display.
NOTE: If the door is opened while the dryer is in DELAY, the countdown time will not
restart unless the door is closed and START has been pressed again.
DAMP SIGNAL (on some models)
This option causes the dryer to beep when clothes have dried to a damp level. Remove
items that you wish to hang dry. The DAMP SIGNAL will only beep when the dryer SIGNAL
is turned on.
Removing clothes and hanging them when they are damp can reduce the need to iron
some items.
R
E
S
I
D
E
N
T
I
A
L
Loading ...
Loading ...
Loading ...