Loading ...
Loading ...
Loading ...
User Manual 06
POWER SOURCE AND GROUNDING
→ It’s recommended to use the washing machine on it’s own dedicated power outlet for both convenience
and safety. The power outlet must be grounded.
Important! If the power cord is damaged, it must be replaced by Residentia Group or one of it’s authorised
service representatives. Please contact 1300 11 HELP (4357) and ensure the appliance is completely
disconnected from the power supply.
INSTALLATION OF DRAIN HOSE
Completely sleeve the drain
hose over the sewer.
Fix and tighten it with a hoop.
( As shown in the figure )
FOR LOWER DRAIN SYSTEM ONLY
Under 15cm
The placed height of water
drain hose shall not exceed
15cm.
Do not bend the water
drain hose and place
it under the washer.
The height of drain hose (“a”)should between 86-100 cm.
Diameter of “b”shuld not less than 3 cm, and flow capacity
not less than 40 L/Min.
FOR UPPER DRAIN SYSTEM ONLY
86~100 cm
Placement of upper water drain hose
Water inlet hose
Clamping nut
Only for model with double
screw thread water inlet pipe
Placement of water drain hose
Under3m
If the water drain hose shall
be extended, its length shall
not exceed 3 meters,
otherwise it will affect the
water discharging time.
Installation of water inlet pipe
Put the water inlet pipe(which has
metallic filtering bag) screw on to the tap.
Tightly screw another end of water
inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the
clamping nut, evenly apply the
force and do not twist the water
inlet valve to avoid breaking of
water inlet valve joint.
Installation Instructions
Loading ...
Loading ...
Loading ...