Loading ...
Loading ...
Loading ...
11
US
US
REMOTE RS-232C
REMOTE IR IN
• These jacks are for receiving the
external control signal. Enables
extended control of the TV using RS-
232C via the RS-232C and IR IN jacks.
RS-232C: connect to the RS-232C
te
rminal of the home controller.
IR IN: connect to the IR out t
erminal
of the home controller.
• Take care to not connect to
headphones or a
n external audio
system.
/ VIDEO IN
• For a composite connection, use an
Analog Extension Cable (not
supplied).
•
(Headphone)
• Supports 3-pole stereo mini jack only.
• You cannot output sound from both
the headphone and the TV speakers
at the same time.
IR BLASTER*
• Use your Sony remote control to
control your Set Top Box (cable/
satellite box). Connect the IR Blaster
Cable (supplied) to the IR Blaster port
on your TV. Place the other end as
shown below.
• To perform IR Blaster setup, press
HOME and select [Settings]
[External inputs] [IR Blaster setup].
USB 1/2, USB 3
• Connecting a large USB device may
interfere with other connected
devices beside it.
• When connecting a large USB device,
connect to the USB 1 port.
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
•
• To enjoy high quality 4K 60p
contents, connect a Premium High
Speed HDMI cable and set the [HDMI
signal format] to [Enhanced format].
Do this setting individually for each
connected HDMI IN terminal. For
details of supported formats, refer to
the “Specifications” in this manual
(page 17-18).
• HDMI IN 3 ARC (Audio Return
Channel)
Connect your audio system to the
HDMI IN 3 to route TV audio to your
audio system. An audio system that
supports HDMI ARC can send video to
the TV, and receive audio from the TV
via the same HDMI cable. If your
audio system does not support HDMI
ARC, an additional connection with
DIGITAL AUDIO OUT (OPTICAL) is
necessary.
* Only on limited region/country/TV model.
3.5 mm
1234
1: L
2: Video
3: Ground
4: R
< 12 mm
< 21 mm
Loading ...
Loading ...
Loading ...