Loading ...
Loading ...
Loading ...
9
NOTE: Distances shown to adjacent walls/surfaces are for the distance to a combustible surface. If the surface is
not combustible the measurement can be smaller than that shown.
Figure 4 - Installation cut-outs
C
B
D min
A min
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
MODEL CODE
DIMENSION (MM)
GAS SUPPLY
LOCATION
A B C D (LEFT OR RIGHT)
WHG642SA 143 560 490 145 Left
WHG644SA 143 560 490 145 Left
WHG646SA 143 560 490 145 Left
WHG646WA 148 560 480 156 Right
WHG756SA 146 730 490 145 Left
WHG952SA 121 880 490 145 Left
WHG956SA 121 880 490 145 Left
WHG956WA 143 830 480 156 Right
This appliance must be installed by an authorised person
and in compliance with:
1. AS/NZS 5601.1 Gas Installations Part 1: General
Installations, and AS/NZS 5601.2 Gas Installations
Part 2: LP Gas installations in caravans and boats for
non-propulsive purposes, or the relevant installation
code for gas appliances in your country.
2. The local gas fitting regulations, municipal building
codes, electrical wiring regulations and any other
relevant statutory regulations.
3. The particular instructions as given below.
WARNING
CAUTION
Cooktops are supplied for use with natural gas (NG).
To use with LPG the injectors MUST be changed using
the conversion kit supplied. Refer LP Conversion on page
12 and 13.
4. A certificate of compliance MUST be given to the
customer after the appliance is successfully installed.
5. This appliance must be earthed.
Loading ...
Loading ...
Loading ...