Loading ...
Loading ...
Loading ...
33
EN
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that
the detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to
add detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>>
Place the dishes in a way that will not prevent the detergent dispenser lid
from opening and the water going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tabltet detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be
clogged with food remnants such as lemon pips. Clean the impellers regu-
larly as illustrated in section "Cleaning and Care".
Decorations and ornaments on kitchen utensils are being erased.
C Decorated glasses and decorated luster porcelains are not suitable for was-
hing in the dishwasher. Manufacturers of glassware and porcelain tableware
items do not recommend washing such kitchen utensils in the dishwashers
either.
Dishes are scratched.
C Kitchen utensils that contains or are made of aluminum should not be was-
hed in dishwasher.
• Dishes are not placed orderly in the machine. >>> When placing the glasses
and other glassware into the basket lean them not against other dishes but
the edges or racks of the basket or the glass support wire. Striking of the
glasses to each other or to other dishes due to the impact of water during
washing can cause breaks, or scratches on their surfaces.
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled
rinse aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hard-
ness of the supply water appropriately. Choose programmes that wash in
higher temperatures (e.g. 60-65°C). You can also use glass protective deter-
gents that are commercially available.
Loading ...
Loading ...