DAP-1860 User Manual

Loading ...

14D-Link DAP-1860 User Manual

Section 3 - Conguration

WPS-PBC Conguration

Step 1 - Initiate WPS Mode

While the Status/WPS LED is blinking amber, push the WPS button on the source

wireless router or AP, and then push the WPS button on the DAP-1860. The

Status/WPS LED will start to ash green. Please allow up to two minutes for the

process to nish. The Status/WPS LED will turn solid green when the DAP-1860

has connected successfully to the source wireless router or access point.

Step 2 - Connecting Devices to the DAP-1860

The DAP-1860 is now ready to share the extended Wi-Fi network with your PCs

and mobile devices. You may use the WPS method to connect devices to the

extended network created by the DAP-1860 using the following network names

(SSID). The password will be the same as the wireless network you are extending.

• (Your router’s SSID)-EXT

The Smart Connect feature will present a single wireless network. When

connecting clients to the extended network, they will be automatically added to

the best band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and

individually congure 2.4 GHz and 5 GHz SSIDs, refer to Extender Settings on

page 36.

Wireless Protected Setup (WPS) makes connecting your DAP-1860 easy. To use WPS, rst make sure the source router or access point

features a WPS Button or has a virtual WPS Button.

Loading ...

User Manual - Page 18