Loading ...
Loading ...
Loading ...
CONTROL PANEL
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, keep button “A” pressed for approx. 2 seconds.
The 4 cooking zone displays show “0”. If within 20 seconds none of
the cooking zones is activated, the hob switches o automatically as a
safety precaution.
SWITCHING ON AND ADJUSTING COOKING ZONES
Press one of the buttons “B” corresponding to the cooking zone you
intend to use. Select the heat setting required with buttons “E” or “C”.
The other selectable cooking settings go from 1 to 9. Press buttons “+/−“
at the same time to cancel all settings.
Pressing button “+” when level 9 is reached, the “Booster” function is
activated and the letter
“A”
appears on the display.
IMPORTANT: the control is deactivated 10 seconds after the heat setting has
been selected.
To change the heat setting, rst press the selection button “B” again, then
proceed to change the setting, using buttons
“E” or “C”
.
TIMER
To set the Timer function, select the desired cooking zone and power
setting then press the cooking zone key again and a luminous dot
will appear on the display of the timer-controlled cooking zone. The
indication “00” blinks on the 2 displays. Press buttons “E” or “C” to set
the time from 1 to 99.
IMPORTANT: after 10 seconds the timer displays will show the power
setting of the other cooking zones.
To view the remaining cooking time, press the timer-controlled cooking
zone key twice.
KEY LOCK
The Key lock function is switched on by holding down button “D” until
a dot lights up above the function button. The Key lock function locks all
the hob’s other functions, with the exception of the On/O button “A”.
The function remains on even after the hob is switched o and on again
and can be deactivated by pressing button “D” again until the dot above
the function button goes o.
RESIDUAL HEAT INDICATOR
When the cooking zone is switched o, the residual heat indicator “H”
remains on or ashes alternating with “0” until the temperature of the
hob returns within safety levels.
IMPORTANT: The hob’s safety features include an automatic switching o
function. Prolonged use of the same heat setting triggers automatic switch-
o of the cooking zone (for example, after around 1 hour at maximum heat
setting, the cooking zone switches o).
IMPORTANT: To avoid a permanent damage the hob:
• do not use pots with bottoms that are not at;
• do not use metal pots with enamelled bottom;
• do not place hot pots/pans over the control panel.
FIRST TIME USE
Upon rst installation, the control panel performs a functional test for
about 1 second, after which it automatically switches to the “Key lock”
function.
To deactivate the function, press and hold button "D"; an acoustic signal
will sound and the corresponding led will turn o.
NOTE: If a reset occurs, repeat the procedure described above.
E
C
D
A
B
A On/O
B Cooking zone and timer selection
C-E Heat setting increase and decrease
D Key lock
MAINTENANCE AND CLEANING
Disconnect the appliance from the power supply.
• Do not use steam cleaning equipment.
• Do not use abrasive sponges or scouring pads as they may damage
the glass.
• After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
• Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a specic hob cleaner
(follow the Manufacturer’s instructions).
• Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
• After cleaning the hob, dry thoroughly.
EN
Loading ...