Loading ...
Loading ...
Loading ...
20
CONNECT VENT
1. Connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is clean.
Vent must t over dryer exhaust outlet and inside exhaust
hood. Check that vent is secured to exhaust hood with a
4" (102 mm) clamp.
2. Move dryer to nal location
Move dryer to nal location. Avoid crushing or kinking vent.
5. Attach long hose to dryer ll valve
and tighten coupling
7. Check for leaks
Check for leaks around “Y” connector, faucets, and hoses.
6. Turn on cold water faucet
Check that the water faucet is turned on.
4"
(101 mm)
30
1
/4"
(768 mm)
Attach other end of long hose to ll
valve at top of dryer back panel.
Screw on coupling by hand until
it is seated on ll valve connector.
Using pliers, tighten the coupling an
additional two-thirds turn.
NOTE: Do not overtighten. Damage
to the coupling can result.
Loading ...
Loading ...
Loading ...