Loading ...
Loading ...
Loading ...
Roomba
®
600 Series Owner’s Guide 3
EN
Using your Roomba
• Always store Roomba on the Home Base so it’s charged and ready to
clean when you need it. If storing o of the Home Base, remove the
battery first and then store Roomba and the battery in a cool, dry place.
Battery and Charging
Charge Roomba using the Home Base. Indicator lights will turn o after 60
seconds to conserve energy while Roomba is charging. Check status of the
battery by pressing the CLEAN button to illuminate the Battery Indicator
or the CLEAN button. Use this chart to determine the status of the battery
while charging.
Setting the Clock (select models)
You must set the clock before scheduling Roomba to clean. To set the time:
Positioning the Home Base
®
Place the Home Base in an open, uncluttered area leaving the
following distances around the Home Base:
• At least 1.5 feet (0.5 meters) on each side of the Home Base
• At least 4 feet (1.2 meters) in front of the Home Base, and at
least 4 feet (1.2 meters) away from stairs
• At least 8 feet (2.4 meters) from Virtual Wall Barriers
Always keep the Home Base plugged in.
Use Instructions
• Turn your robot over and remove the battery pull tab.
Then place Roomba on the Home Base to charge the battery.
• To fully charge the battery before the first cleaning cycle, allow
Roomba to charge on the Home Base for 3 hours.
• Manually wake Roomba up by pressing CLEAN once.
To start a cleaning cycle, press CLEAN again.
Note: Remove excess clutter from floors before cleaning
(e.g. clothing, toys, etc.). Use Roomba frequently to
maintain well-conditioned floors.
• To pause Roomba during a cleaning cycle, press CLEAN.
• To resume the cleaning cycle, press CLEAN again.
• To end the cleaning cycle and put Roomba in standby mode,
press and hold CLEAN until Roomba’s indicators turn o.
• To send Roomba back to its Home Base during a cleaning cycle,
press DOCK on Roomba. This will end the cleaning cycle.
• To use SPOT Cleaning, place Roomba on top of the localized
debris and press SPOT on the robot. Roomba will thoroughly
clean the area by spiraling outward about 3 feet (1meter) in
diameter and then spiraling inward to where it started.
Note: After each use, empty the bin and clean the filter.
Indicator Color Battery Status
Amber Charging
Solid green Fully charged
1
2
3
Press and hold CLOCK.
While holding CLOCK, use the DAY, HOUR, and MINUTE
buttons to set the correct time.
Release CLOCK. Roomba will beep to indicate that the
time has been set.
Loading ...
Loading ...
Loading ...