Loading ...
Loading ...
Loading ...
14
Removing and Replacing the Oven Door
(Hinge B)
The door is heavy. For safe, temporary storage, lay the door
flat with the inside of the door facing down.
To Remove Oven Door:
1. Open the door to the fully opened position.
2. Pull up the lock located on both hinge supports and engage it in the
hinge lever hooks (Figure 1). You may have to apply a little downward
pressure on the door to pull the locks fully over the hinge lever hooks.
3. Grab the door by the sides and pull the bottom of the door up and
toward you to disengage the hinge supports. Keep pulling the bottom of
the door toward you while rotating the top of the door toward the range
to completely disengage the hinge levers (Figure 2).
4. To clean oven door, follow the instructions provided in the General Care
& Cleaning table.
To Replace Oven Door:
1. Grab the door by the sides; place the hinge supports in the hinge slots.
Open the door to the fully opened position.
2. Disengage the lock from the hinge lever hooks on both sides (Figure 3).
Note: Make sure the hinge supports are fully engaged before unlocking
the hinge levers.
3. Close the oven door.
Special Door Care Instructions
Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass may weaken its
structure causing an increased risk of breakage at a later time.
Changing the Oven Light
On some models an interior oven light will turn automatically when the
oven door is opened. The oven light may be turned on when the door is
closed by using the oven light switch located on the control panel. On
some models, the lamp is covered with a glass shield held in place by
a wire holder. THEGLASSSHIELDMUSTBEINPLACEWHENEVER
THE OVEN IS IN USE.
To replace the light bulb:
CAUTION: BE SURE THE OVEN IS COOL.
1. Turn the power off at the main source.
2. Wear a leather-faced glove for protection against possible broken
glass.
3. Replace bulb with 40-watt appliance bulb only.
4. For models with glass shield, press holder on one side to release
glass shield, change bulb and be sure to replace the glass shield.
Lock in normal position
Figure 3
Hinge lever
Lock engaged for door removal
Figure 1
HINGE SLOT - Door removed
from the oven
Figure 2
Hinge lever hook
Hinge
support
Care & Cleaning
Loading ...
Loading ...
Loading ...