Loading ...
Loading ...
Loading ...
Installation Instructions
REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles – on some models)
Stainless steel (on some models):
REMOVING
THE DOOR
HANDLE: Loosen
the set screws with
the 3/32″ Allen
wrench and
remove the handle.
NOTE: For Double
Door models
follow the same
procedure on the
opposite door.
REVERSING THE
DOOR HANDLE:
• Remove the
handle mounting
fasteners with a 1/4″ Allen wrench and transfer
the handle mounting fasteners to the right side.
• Remove and transfer the plug button and logo
badge to the left side of the fresh food door.
NOTE: Use a flat plastic edge to prevent damaging
the door. Remove any adhesive on the door with
a mild detergent. Remove the paper covering on
the adhesive backing on the logo badge prior to
carefully attaching the badge to the door.
Plastic handle (on some models):
REMOVING THE
DOOR HANDLE:
Slide the handle
up on the handle
mounting
fasteners and
remove the
handle.
For some models,
depress the tab
on the underside
of the handle and
slide the handle
up and off of the
mounting
fasteners.
REVERSING THE DOOR HANDLE:
• Remove the handle mounting fasteners with a
3/8″ or 10 mm socket wrench and transfer the
handle mounting fasteners to the right side.
• Remove and transfer the plug button and logo
badge to the left side of the fresh food door.
NOTE: Use a flat plastic edge to prevent
damaging the door. Remove any adhesive on
the door with a mild detergent. Remove the
paper covering on the adhesive backing on the
logo badge prior to carefully attaching the badge
to the door.
A
A
5
After removing the handle: Move the small plug
button from the top right side of the door top and
insert it into the hole on the opposite side.
Small
Plug
Button
A
B
A
B
Mounting
Fasteners
Mounting Fasteners
Plug
Button
Plug
Button
(appearance may vary)
Badge
Badge
(appearance may vary)
(appearance may vary)
REMOVE THE FREEZER DOOR
HANDLE
Stainless steel and some plastic handles:
Loosen the set screws located on the underside
of the handle with the 3/32″ (or 1/8″ on some
models) Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need to
be tightened or removed use a 1/4″ Allen wrench.
Plastic handle:
Slide the handle to the right on the handle
mounting fasteners and remove the handle.
NOTE: If the handle mounting fasteners need to
be tightened or removed use a 3/8″ or 10 mm
socket wrench.
A
A
6
A
A
A
A
Mounting
fasteners
Slots on back
of handle
(appearance may vary)
A
19
Loading ...
Loading ...
Loading ...