Loading ...
Loading ...
Loading ...
21
Oven Controls
Setting Clock
When the appliance is first powered up or when the power sup-
ply to the appliance has been interrupted, 12:00 will flash in
the display. Press STOP or Set Clock to stop the flashing and set
the clock.
The time of day must first be set before operating the oven.
To set the clock
1. Press CLOCK once. CLO appears in display.
2. Press or and the time appears in the display.
Continue to hold arrow key until the correct time of day
appears in the display.
3. Press START to accept time of day.
Important note:
The time of day cannot be changed when the oven is set for
cooking.
Oven Lock
The Oven Lock feature allows you to lock the oven portion of
the appliance while the oven is not in use.
To activate Oven Lock feature:
1. Be sure the door is completely closed.
2. Press and hold and together for 3 seconds. Loc
will appear in the display. The OVEN LOCK indicator light
will flash while the motor driven door latch begins locking
the oven door. Do not open the door during this time. Allow
15 seconds for the door to completely lock. Once oven
door is locked, the time of day will appear in the display.
To cancel the Oven Lock feature:
1. Press and hold and together for 3 seconds. The
OVEN LOCK indicator light will flash and the motor driven
door latch will begin to unlock. Do not open the door at this
time. The door will unlock completely in about 15 seconds.
2. The oven control keys will be available, and the oven door
can be opened again.
Important notes:
• To avoid possible damage to the oven door latch
mechanism, do not attempt to open or close the oven door
whenever the OVEN LOCK indicator light is flashing.
• If a control key is pressed when the OVEN LOCK is active,
Loc will appear in the display as a reminder that the oven
keys are inactive when the OVEN LOCK feature is active.
Silent or audible control mode
The appliance may be set for silent or audible operation. If the
silent mode is selected, most of the sounds associated with
setting the controls will be silent. But, sounds will be heard when
the timer ends, when a baking function ends, and when the set
preheat temperature is reached.
1. Press and hold Delay Start until the control beeps once
(about 3 seconds). The present mode appears as OFF
(silent operation) or ON (for audible operation).
2. Use or to toggle between audible or silent
modes. To save, press START when the desired mode of
operation appears in the display.
Changing Temperature Display to Fahrenheit (ºF) or
Celsius (ºC)
The electronic oven control is set to display °F when shipped
from the factory. The display may be changed to show either °F
or ºC oven temperatures.
To change temperature display mode from °F to °C or from
°C to °F:
1. Press Broil. HI appears in the display.
2. Press and hold Broil until F or C appears in the display.
3. Press either or to toggle between F or C mode
choices.
4. Press START to accept change. The display will return to
the time of day.
Important note:
The temperature display mode cannot be changed when the
oven is set for cooking.
Operating Oven Light
The oven light will automatically turn on when the oven door is
opened.
Press LIGHT to turn the oven light on or off whenever the oven
door is closed. The oven light will not operate during the self
clean operation.
The oven light is located at the upper left rear wall of the oven
interior and is covered with a glass shield held in place by a
wire holder. The glass shield protects the bulb from high tem-
peratures and should always be in place when the oven is in
use.
To replace the interior oven light, see “Replacing the Oven
Light” on page 36.
Loading ...
Loading ...
Loading ...