Loading ...
Loading ...
Loading ...
Daytime running lights
24-watt bulb, PW24W.
1. If necessary, remove the high beam bulb
connector.
2. Remove the bulb holder.
3. Remove the bulb from the bulb holder.
4. To insert the new bulb, proceed in reverse
order of removal. During insertion, the bot‐
tom of the bulb holder must be facing
downward. Make sure that the bulb holder
snaps into place.
5. Attach the high beam bulb connector.
6. Close the headlight housing with the lid.
Make sure that the lid engages.
Xenon headlights
Xenon headlights
Because of the long life of these bulbs, the
likelihood of failure is very low. Switching the
lights on and off frequently shortens their life.
If a bulb fails, reel on the front fog lights and
continue the trip with great care. Comply with
local regulations.
Do not perform work/bulb replacement
on xenon headlights
Have any work on the xenon lighting system,
including bulb replacement, performed only by
a service center. Due to the high voltage
present in the system, there is a danger of fatal
injuries if work is carried out improperly.◀
For checking and adjusting headlamp aim,
please contact your BMW center.
Headlights
1 Parking lights / daytime running lights
2 Low beams/high beams/headlight flasher
3 Turn signal
Low beams and high beams are designed with
xenon technology.
The parking lights and daylight running lights
are made using LED technology.
Contact your service center in the event of a
malfunction.
Turn signal
Follow general instructions, refer to page 212.
Seite 216
Mobility Replacing components
216
Online Edition for Part no. 01 40 2 960 440 - II/15
Loading ...
Loading ...
Loading ...