Loading ...
Loading ...
Loading ...
Ice cube container
^ Pull out the ice cube container.
^ Empty and clean the ice cube
container with lukewarm water.
^ Thoroughly dry the container and the
anti-clumping screw to prevent new
ice cubes from sticking.
^ To re-insert push the ice cube
container all the way back onto the
supports until it locks into position.
^ If the container cannot be pushed all
the way back, twist the anti-clumping
screw in the container.
Drip tray
The drip tray collects excess water.
As soon as the drip tray is full, the "lock"
button on the Ice/Water dispenser
control panel will flash. A sensor
located in the drip tray detects when
the drip tray is full.
The drip tray must be emptied and
cleaned. However, to prevent odors,
the drip tray should be cleaned daily.
When the "lock" button flashes yellow:
^ Remove the drip tray cover.
^ Empty and clean the drip tray using a
sponge or kitchen towel.
^ Replace the tray cover.
The "lock" button is now white again.
Ventilation slits
^ Check the ventilation slits in the base
panel regularly. Remove any
dirt/dust with a vacuum cleaner or
brush. Clean as needed.
Door seals
Do not use any oils or grease on the
door seals. This may cause the
seals to deteriorate and become
porous over time.
^ Clean the door seals with warm water
and dry thoroughly.
After cleaning
^ Return all shelves and accessories.
^ Plug in the appliance and turn it on
with the main switch.
^ Switch on the SuperCool function.
The freezer section will cool down
quickly.
^ Once the temperature is cold
enough, place the freezer baskets
containing the frozen food into the
freezer.
^ Turn off the SuperCool function on a
temperature of 0 °F (-18 °C) is
reached.
Cleaning and care
33
Loading ...
Loading ...
Loading ...