Loading ...
Loading ...
Loading ...
ENGLISH 13
6.2 Installation
Refer to the installation instructions
supplied separately.
Installing the warming drawer in
combination with another appliance
requires be a fixed intermediate shelf in
the carcase to support the weight of both
appliances.
The appliance to be installed in
combination with the warming drawer will
be installed directly on top of it.
Follow the instructions given in the
corresponding instruction and installation
booklet for installation of the combined
appliance.
6.3 Electrical connection
Electrical installation must be performed
by a qualified electrician.
Before connecting the warming drawer to
the mains electricity supply, check that
the voltage and frequency of the mains
supply matches that shown on the data
plate inside the appliance.
The electrical connection should be
made via an omnipolar switch rated for
the current capacity with minimum 3 mm
contact separation, in order to provide
isolation in emergencies or when
cleaning the warming drawer.
The connection must be suitably earthed.
WARNING:
The warming drawer must be earthed.
If the appliance flex requires
replacement, contact Technical
Assistance or an authorised service
centre, as specialised tools are required.
The manufacturer and retailer do not
accept responsibility for any injury to
people or animals or damage to personal
property as a result of failure to follow the
supplied installation instructions.
7. ENVIRONMENTAL PROTECTION
Recycle materials with the
following symbol.
Place the packaging in the
corresponding containers for recycling.
Help protect the environment and human
health and to recycle waste from
electrical and electronic appliances.
Do not dispose of appliances
marked with the following symbol
with general household waste.
Take the product to your local recycling
facility or contact your local council.
Loading ...