Loading ...
Loading ...
Loading ...
12
: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
: Handle appearance may vary from the illustrations
on this page.
Loosen the set screws located on the lower side of
the handle with a ⅛ in. Allen wrench and remove the
handle.
: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
Place the handle on the door by tting the handle
footprints over the mounting fasteners and tightening
the set screws with a ⅛ in. Allen wrench.
: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
When assembling or disassembling the handles:
• Grasp the handle rmly to ensure it will not drop or
cause injury.
• Prevent the handle from swinging toward nearby
people or animals.
• Insert the bracket hole of the handle into the
stopper bolt of the door exactly, then assemble the
set screws to x the handle in place.
• Check for any gap between the door and handle
after the handle is xed in place.
Loading ...
Loading ...
Loading ...