Loading ...
Loading ...
Loading ...
MOBILITY AT A GLANCECONTROLSDRIVING TIPSENTERTAINMENT
181
NAVIGATIONREFERENCE
1 Compressor
2 Filling hose, value remover, speed
restriction label
3 Wheel stud wrench
*
4 Vehicle jack*
5 Torx insert bit for screwdriver
6 Flat screwdriver/Phillips screwdriver,
towing eyelet
7 Hub cover remover
8 Filling canister
Use of the Mobility System may be ineffec-
tive if the tire puncture measures approx.
1/8 in/4 mm or more. Contact the nearest MINI
Dealer if the tire cannot be made drivable with
the Mobility System.<
Liquid sealant
1 Filling hose
2 Filling canister
Filling
1. Shake the filling canister.
2. Screw the filling hose onto the filling
canister.
3. Unscrew the dust cap from the valve of the
defective tire.
4. Screw out the valve core with the valve
remover. The valve remover is located in a
package with the filling hose.
5. Remove the cap from the filling hose.
6. Push the filling hose onto the tire valve.
7. Hold the filling canister with the cap down
and squeeze.
8. Squeeze the entire contents of the canister
into the tire.
9. Remove the filling hose.
10. Screw the valve core into the tire valve with
the valve remover.
In the event of a lost or dirty valve core
you will find another valve core in the
package with the filling hose.
Remember that the liquid canister must be
replaced every four years if the equipment has
not been used.<
Compressor
Connector, cable and connection hose are
stored in the compressor housing.
1 Connector and cable for lighter socket
2 Connection hose for connecting the com-
pressor and tire valve
3 On/off switch
4 Pressure gauge for indicating the tire infla-
tion pressure
5 Release button for reducing the tire inflation
pressure
Reinflating the tire
1. Unscrew the dust cap from the tire valve of
the defective tire.
2. Screw connection hose 2 onto the tire valve.
Online Edition for Part no. 01 41 2 602 066 - © 02/09 BMW AG
Loading ...
Loading ...
Loading ...