Loading ...
Loading ...
Loading ...
29
Continued
If a Tire Goes Flat Temporarily Repairing a Flat Tire
10
. Unplug the power plug from the accessory
power socket.
11
. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
12
. Press the pressure relief button until the
gauge returns 0 psi (0 kPa).
13
. Apply the repair notification label to the
flat surface of the wheel.
The wheel surface must be clean to
ensure the label adheres properly.
Repair Notification Label
Valve Stem
Sealant/Air Hose
Distributing the Sealant in the Tire
Repair Notification Label
1. Apply the speed restriction label to the
location as shown.
2. Drive the vehicle for about 10 minutes.
Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.
Injecting Sealant and Air
See a Honda dealer for a replacement sealant bottle
and proper disposal of an empty bottle.
Distributing the Sealant in the Tire
Stop and recheck the air pressure after every 10
minutes of driving as necessary until you reach the
nearest service station where you are able to have
the tire permanently repaired or replaced.
Handling the Unexpected
Home
TOC
SEC
Loading ...
Loading ...
Loading ...