Loading ...
Loading ...
Loading ...
Installation instructions
Connecting drain and electrical
| Form a "U" shape on the end of the drain hose with the
hose pointed toward the drain. Place the formed end in
a laundry tub or a standpipe and secure the drain hose
with the cable tie (provided in the enclosure packacje)
to the standpipe, inlet hose, laundry tub, etc. so the hose
does not pull out from the force of the water.
The standpipe inside diameter must be 1-1/4" (3.2 cm)
minimum. There must be an air gap around the drain hose in
2 Plug the power cord into a grounded outlet.
Groundi_
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
CABLE TIE
/
3 Turn on the power at the circuit breaker/fuse box.
4 Read the Use & Care Guide provided with the laundry
center. It contains valuable and helpful information that
will save you time and money.
5 Run the washer through a complete cycle, checking for
water leaks and proper operation.
6 If you have any questions during initial operation, please
review the "Avoid Service Checklist" in your Use & Care
Guide before calling for service.
7 Place these instructions in a location near the appliance
for future reference.
NOTE
A wiring diagram and technical data sheet are located
behind the dryer access panel.
19
Loading ...
Loading ...
Loading ...