Loading ...
Loading ...
Loading ...
4
Setting the Amount of Reverb
Reverb adds echo to the sound to give it more fullness
and reverberation.
Use the REVERB control to adjust the depth (the
degree to which the reverb effect is applied to the
sound). To turn the reverb off, set the control in the
far left position.
You can also change the type of reverb to apply.
The reverb function reverts to its default setting when you turn the power off.
Adjusting the Pitch (Tuning)
The pitch of this instrument is set so that A3=440Hz. You can fine tune the pitch up or down 65 cents in 1 cent
steps (100 cents is equal to 1 semitone).
The pitch setting is stored when you turn the instrument off.
Reverb type Effect Setting method
Room Reverberation similar to that heard in a normal
room
Hold down the A-1, A#-1, and B-1 keys and press C2.
Hall 1
(Default setting)
Reverberation similar to that heard in a small
concert hall
Hold down the A-1, A#-1, and B-1 keys and press D2.
Hall 2 Reverberation similar to that heard in a large
concert hall
Hold down the A-1, A#-1, and B-1 keys and press E2.
Stage Reverberation similar to that heard on a stage Hold down the A-1, A#-1, and B-1 keys and press F2.
Operation Setting method
Raise the pitch Hold down the A-1 and B-1 keys and press any one of the keys between C3 and B3.
Lower the pitch Hold down the A-1 and A#-1 keys and press any one of the keys between C3 and B3.
Return to default tuning Hold down the A-1, A#-1, and B-1 keys and press any one of the keys between C3 and B3.
C2 (Room)
D2 (Hall 1)-default E2 (Hall 2)
F2 (Stage)
A
-1 B-1
A
#
-1
C3–B3
A
-1 B-1
A
#
-1
0102_silentseries_en.fm 4 ページ ２００９年１月２８日 水曜日 午前１０時７分
Loading ...
Loading ...
Loading ...