Loading ...
Loading ...
Loading ...
17
†
The maximum additional water used for any combination of options is 2.6 gal. (10.0 L).
Dishwasher Control Section
Dishwasher Feedback Section
Canceling a Cycle
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.
2. Press CANCEL/DRAIN button once. The Cancel/Drain light will light up.
3. Close the door within 3 seconds. The dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the
dishwasher drain completely. The Cancel/Drain light turns off after 2 minutes.
Changing a Cycle After Dishwasher Is Started
You can interrupt a cycle and restart your dishwasher from the beginning using the following procedure.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
2. Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser before
restarting your new cycle.
3. Press CANCEL/DRAIN twice to reset the control.
4. Select new cycles and options.
5. Press START/RESUME.
Sani Rinse
This high temperature option sanitizes your
dishes and glassware in accordance with
NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certified
residential dishwashers are not intended
for licensed food establishments. Only
sanitizing cycles have been designed to
meet the requirements of the NSF/ANSI
184 performance standard for soil removal
and sanitization efficacy. There is no
intention, either directly or indirectly, that
all cycles on a NSF/ANSI 184 certified
dishwasher meet the NSF/ANSI 184
performance standard for soil removal and
sanitization efficacy. The Sani indicator
indicates at the end of the cycle whether
the Sani Rinse option was successfully
completed. If the indicator does not
activate, it is probably due to the cycle
being interrupted.
Pots & Pans
Normal Wash
Increases the main wash
temperature from 105°F
(41°C) to 130°F (54°C) and
the final rinse from 140°F
(60°C) to 156°F (69°C).
55 100
0 - 1.8
(0 - 7.0)
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When LOCK ON is lit, all buttons are
disabled. The dishwasher door can still be opened/closed while the controls are locked.
To turn on the Lock
Press and hold HEATED DRY for 3 seconds. LOCK ON will light up. If you press any pad while your dishwasher is locked, the light
flashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off the Lock
Press and hold HEATED DRY for 3 seconds. The light turns off.
Selecting Cycles and Options
1. Select the desired cycle. If you want to run the last cycle that was completed, you can simply press START once to show which
options you used, then press START again to start the cycle.
2. Select the desired options. Not all options are available for every cycle.
Loading ...
Loading ...
Loading ...