Loading ...
Loading ...
Loading ...
TROUBLESHOOTING/SPECIFICATIONS/OPTIONAL ACCESSORIES
Model WM2140C*
Description Front-Loading Washer
Electrical Requirements 120 VAC @ 60 Hz.
Max. Water Pressure 14.5~116 PSI (100~800 kPa)
Net Weight 190 lbs. (86 kg)
Max. Spin Speed 1,100 RPM
Dimensions 27”(W) X 29
3
/4”(D) X 38
11
/16”(H), 51”(D with door open)
68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 129.7 cm (D with door open)
OPTIONAL ACCESSORIES
For these and other LG products, contact your local LG dealer, or visit our Web site at www.lg.com.
Pedestal
Give your LG washer and dryer a boost with matching
14 inch high pedestals. They feature a storage drawer
for added convenience.
14” Pedestal Color
WDP4W White
Stacking Kit
If space is at a premium, use this kit to securely
stack your LG front-load washer and dryer.
Bracket Kit Color
WSTK1 White
KEY DIMENSIONS AND SPECIFICATIONS
The appearance and specifications listed in this manual may vary due to constant product improvements.
USING SMARTDIAGNOSIS™
- Only use this feature when instructed to do so by the call center. The transmission sounds similar to a fax machine, and so has no meaning except to the call center.
- SmartDiagnosis™ cannot be activated if the washer does not power up. If this happens, then troubleshooting must be done without SmartDiagnosis
TM
.
If you experience problems with your washer, call 1-800-243-0000 (1-888-542-2623 in Canada). Follow the call center agent’s instructions, and perform
the following steps when requested:
Press the POWER button to turn on the washer. Do not press any other buttons or turn the cycle selector knob.
1
When instructed to do so by the call center, place the mouthpiece of your phone very close to the POWER button.
2
Press and hold the WASH/RINSE button for three seconds, while holding the phone mouthpiece to the icon or POWER button.
3
Keep the phone in place until the tone transmission has finished. This takes about 17 seconds, and the display will count down the time.
• For best results, do not move the phone while the tones are being transmitted.
• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.
• Pressing the POWER button during the transmission will shut off the SmartDiagnosis™.
4
Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be able to assist you using the
information transmitted for analysis at the call center.
5
32
MFL62526858_en_100728.indd 32 7/28/10 4:20:50 PM
Loading ...
Loading ...
Loading ...