Loading ...
Loading ...
Loading ...
41
INTERRUPTING AND CHANGING
THE PROGRAM
349780
INTERRUPTIONS
Interrupting the program process
Press the START/PAUSE key to pause/
resume and the program.
Open door
If the dryer door is opened during the
drying process, the drying cycle will be
interrupted.
When the door is closed and the START/
PAUSE key is pressed, the drying will
resume from the point at which it was
interrupted.
Full condensate tank
When the condensate tank is full, the drying
program will be interrupted (signal light 2b
will flash).
Empty the condensate tank (see section
Cleaning and Maintenance).
Press the START/PAUSE key to resume the
drying cycle from the point at which it was
interrupted.
Power supply failure
When power supply is resumed, the signal
light on the START/PAUSE key will flash.
To resume the drying process, press the
START/PAUSE key.
CHANGING THE PROGRAM/
FUNCTIONS
Press the START/PAUSE key and rotate the
program selector dial to the "OFF" position.
Select another program/function and press
the START/PAUSE key again.
SAVING PERSONAL SETTINGS
Initial settings may be changed. When
the program and additional functions are
selected, you may store such combination
by pressing the START/ PAUSE key and
holding it for five seconds.
A signal light on the START/PAUSE key
and an acoustic signal will confirm your
selection.
S C (settings changed) will be displayed
briefly on the display.
Press the START/PAUSE key to start the
drying process.
The changed combination will appear every
time you switch on the dryer.
Follow the same procedure to change a
previously saved combination.
Loading ...
Loading ...
Loading ...