Loading ...
Loading ...
Loading ...
21
Caring for Your Dryer
NOTE
If the filter is not fitted to the dryer,
you can not operate the dryer.
Caring for your Dryer is Very Important
It’s not difficult to care for your dryer, but it is
important that you do care for it, to get the best
out of it.
Clean Filter
Clean the filter after each use and check it
before each use. It should also be cleaned if the
‘‘Clean Filter’’ light becomes illuminated and the
buzzer sounds whilst the dryer is in operation.
Cleaning or emptying the filter will reduce drying
times and energy consumption and lengthen the
dryer life.
Empty Water Container
Condensed water is collected in the water
container.
Empty the water container after every use.
Not doing so will affect the drying performance.
If the water container is full, the “Empty Water”
lamp glows and the buzzer sounds while the
dryer is operating. If this should occur, the water
container needs to be emptied within the next
hour.
If “Clean Filter” symbol is displayed during the operation, clean the filter promptly.
1.Cool the dryer down and follow the above steps.
2.Press the Start/Pause button to resume the cycle after cleaning and refitting the filter.
CAUTION
- The lint filter must be cleaned after
each use.
- Lint must not to be allowed to
accumulate around the tumble dryer.
- Remove any excess Lint from around
the filter opening when it is removed for
cleaning.
CAUTION
- After washing the filter, please dry
thoroughly.
- Lint must not be left to accumulate
in the dryer.
NOTE
A high atmospheric temperature and
a small room may both increase
drying time as well as energy
consumption.
CAUTION
If the laundry is not spun at a high speed
during washing, energy consumption
and drying time will increase.
In some instances, the LED window may
display “ ” (Empty water symbol) and
the dryer may stop because the water
container is full.
WARNING
Do not drink the condensed water.
1. Open the door.
1. Press the
Start/Pause button
to pause the
operation, then pull
out the water
container.
2. Empty water
container in the
sink.
3. Push it back into
the dryer.
4. Press the
Start/Pause button
to resume the
drying operation.
5. Close the door.
2. Pull the filter out.
3. Clean the filter by
using a vacuum
cleaner or rinsing
under the tap.
4. Replace the filter.
Push the filter all
the way down to
avoid interference
with the door.
Loading ...
Loading ...
Loading ...