Loading ...
Loading ...
Loading ...
5
CYCLE GUIDE — STANDARD CYCLES
Items to wash
using default
cycle settings:
Cycle: Temp*:
Available
Options:
Cycle Details:
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3-5 items, not more than 1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
* All temperature selections feature a cold rinse.
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best ts the
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Heavy Duty
Normal
Delicate
Cycle Signal
Cycle Signal
Cycle Signal
Hot
Warm
Cold
Hot
Warm
Cold
Warm
Cold
Sturdy colorfast fabrics and
heavily soiled garments, towels,
and jeans
Normally soiled cottons, linens,
sheets, and mixed garment
loads
Sheer fabrics, lingerie,
sweaters, and special care
items marked “Hand Washable”
This cycle combines fast-speed tumbling,
longer wash time, and extra high-speed spin to
shorten drying times. It is designed for medium
and large loads.
This cycle combines medium-speed tumbling
and extra high-speed spin, and a load cooling
process to reduce wrinkling.
This cycle combines low-speed tumbling and
low-speed spin for gentle fabric.
NOTE: A single item, bulky items, or tightly packing may cause imbalance. Add items or try to evenly distribute wet laundry in the
drum, and start a Rinse & Spin and Drain & Spin cycle. If the laundry is still wet, take half of the load out of the washer and try again.
CYCLE GUIDE — SPECIAL-PURPOSE CYCLES
* All temperature selections feature a cold rinse.
Drain & Spin
Clean Washer
with affresh
®
Swimwear, items that need
rinsing only.
Cold
Cycle Signal
This cycle adds water followed by a high speed
tumbling. For some fabrics you may wish to set
the spin speed to a lower setting.
Cycle Signal
Cycle Signal
N/A
N/A
Wet load of clothes.
No clothes in washer.
Use this cycle to get water extracted from
clothes or you want additional extraction on
a washed load. Using Drain & Spin. Use this
cycle with medium and large loads.
Use this cycle every 30 washes to keep the
inside of your washer fresh and clean. This
cycle uses a higher water level. Use with
affresh
®
washer cleaner tablet or liquid chlorine
bleach to thoroughly clean the inside of your
washer. This cycle should not be
interrupted. See “Cleaning Your Washer.”
IMPORTANT: Do not place garments or other
items in the washer during the Clean Washer
with affresh
®
cycle. Use this cycle with an
empty wash tub.
Rinse & Spin
Items to wash
using default
cycle settings:
Cycle: Temp*:
Available
Options:
Cycle Details:
Loading ...
Loading ...
Loading ...