Loading ...
Loading ...
Loading ...
11
PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
6. Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash and the LED
toasting progress indicator will cease
flashing. The LED toasting progress
indicator will re-illuminate to the
previously selected browning setting.
7. Once the toasting cycle has completed
and the carriage has risen and locked
into the raised position, the toast
ready alert will sound. Remove the
toast. The TOAST/CANCEL button
surround will re-illuminate in white
for up to 30 seconds, ready for the next
toasting cycle.
NOTE
The toaster will revert to stand-by
mode after 30 seconds if a BUTTON
is not pressed or the slide is not
adjusted. All button surrounds and
LED toasting progress indicator will
cease illumination.
NOTE
The toaster will re-activate from
stand-by mode and the
TOAST/CANCEL button surround
and LED toasting progress indicator
will illuminate when:
• Any of these buttons are pressed
(except the TOAST/CANCEL
button which will start the
toasting process).
• The BROWNING CONTROL
slide is moved.
• The power at the power outlet is
turned off then on again.
WARNING
Do not leave the toaster unattended
when in use as toast may jam. In the
unlikely event that bread, crumpets or
muffins become jammed in the toasting
slots, all the button buttons and the
LED toasting progress indicator will
flash and the elements will turn off.
Switch the toaster off at the power
outlet, remove the power plug and
allow the toaster to cool completely
before carefully easing the bread
out of slots. Take care not to damage
the elements.
TOAST/CANCEL BUTTON
The TOAST/CANCEL button surround will
illuminate in white for up to 30 seconds
when the appliance is turned on. The
toaster will revert to stand-by mode after
30 seconds if a button is not pressed or the
BROWNING CONTROL slide is
not adjusted.
• Press the TOAST/CANCEL button
once to lower the carriage and start the
toasting process. The TOAST/CANCEL
button surround will then illuminate
in red.
• Press the TOAST/CANCEL button
during operation to cancel the toasting
process or any other function. The
TOAST/CANCEL button illumination
will change from red to white and stay
illuminated for up to 30 seconds.
NOTE
Toasting can be stopped at any time
by pressing the TOAST/CANCEL
button located on the top of the
toaster. This will cancel the operation
and the carriage will move to the
raised position.
BTA825_BTA830_BTA845_IB_B13.indd 11 19/04/13 10:50 AM
Loading ...
Loading ...
Loading ...