Loading ...
Loading ...
Loading ...
Bridge Surface Element with Selector Knob (on some models)
You can create an oblong heated area by using
the left rear element in addition to the front
element bridge combination.
Make sure the pan rests flat on the glass
cooktop.
When the SELECTOR knob points to , the
control knob controls both the left front surface
element and the bridge area.
Choose pans that match the circle/bridge area
as closely as possible.
When the SELECTOR knob points to , the
control knob controls the left front surface
element only.
Bridge Surface Element without Selector Knob (on some models)
Make sure the pan rests flat on the glass
cooktop.
To use the bridge element, push and turn the
control knob to , stopping at the desired
settings.
Choose pans that match the circle/bridge area
as closely as possible.
To use the left front surface element only, push
and turn the control knob to , stopping at
the desired settings.
Dual Surface Element with Selector Knob (on some models)
To use the large surface element, turn the
SELECTOR knob to . Push in and turn the
control knob to the desired setting. The element
will heat the entire area contained by the larger
circle.
To use the small surface element, turn the
SELECTOR knob to . Push in and turn the
control knob to the desired setting. The element
will only heat the area inside the smaller circle.
8
Using the surface elements.
Tri-Ring Surface Element with Selector Knob (on some models)
To use the largest cooking area, turn the
SELECTOR knob to . Push and turn the
control knob to the desired setting.
To use the medium cooking area, turn the
SELECTOR knob to .
Push down and turn the control knob to the
desired setting.
To use the smallest cooking area, turn the
SELECTOR knob to . Push and turn the control
knob to the desired setting. This will activate
only the smallest inside heating area.
LO
Small
surface
element
setting
Large
surface
element
setting
Dual Surface Element without Selector Knob (on some models)
To use the small surface element, turn the
control knob to the settings.
To use the large surface element, turn the
control knob to the settings.
OFF
HI
8
8
6
6
4
4
2
2
LO
LO
The dual surface element has 2 cooking sizes to select from so you can match the size of the element to the size of the cookware you are
using.
The Tri-Ring surface element offers 3 cooking areas to match the size of the cookware you are using.
Loading ...
Loading ...
Loading ...