Loading ...
Loading ...
Loading ...
Faults – what to do? en
17
3 Faults – what to do?
Faults – what to do?
Before you call customer service, use this table to check whether you can rectify the
fault yourself.
--------
Temperature differs greatly from the set value.
Switch off appliance for 5 minutes.
~ "Switching off and disconnecting the appliance"
on page 10
If the temperature is too warm, check temperature
again after a couple of hours.
If the temperature is too cold, check temperature
again on the following day.
Displays do not illuminate.
The mains plug has not been inserted properly. Connect the mains plug.
The fuse has tripped. Check the fuses.
The power has failed. Check whether the power is on.
Appliance is not cooling, display and lighting are lit.
Demo mode switched on. Start the appliance self-test.~ "Customer service"
on page 18
When the programme has ended, the appliance
switches over to normal operation.
Loading ...
Loading ...
Loading ...