Loading ...
Loading ...
Loading ...
4
CAUTIONS ON ADDITIVES TO WATER:
• To maintain the wick’s integrity and warranty, never add anything to the water except
Essick Air bacteriostat for evaporative humidifiers. If you only have softened water
available in your home, you can use it, but mineral buildup will occur more quickly. You
can use distilled or purified water to help extend the life of the wick.
• Never add essential oils in the water. It can damage the plastic seals and cause leaks.
NOTES ON LOCATION:
In order to get the most effective use from your humidifier, it is important to
position the unit where the most humidity is needed or where the moist air will be
circulated throughout the house such as near
a cold air return. If the unit is positioned close
to a window, condensation may form on the
window pane. If this occurs the unit should be
repositioned in another location.
Place humidifier on a flat level surface. Do
NOT position the unit directly in front of a hot
air duct or radiator. Do NOT place on soft
carpet. Due to release of cool, moist air from
the humidifier, it is best to direct air away from
thermostat and hot air registers. Position
humidifier next to an inside wall on a level
place at least 2 inches away from the wall or
curtains.
Be sure that the humidistat, which is located on the power cord, is free from
obstruction and away from any hot air source.
ASSEMBLY
1) Unpack humidifier from carton. Remove all packaging materials.
CASTERS
2) Lift chassis off of base and set aside. Remove the parts bag, wick/ wick retainer
and float from base.
3) Turn the empty base upside down. Insert each caster stem into a caster hole on
each corner of the humidifier bottom. The casters should fit snugly and be inserted
until the stem shoulder reaches the cabinet surface. Turn the base right side up.
FLOAT
4) Install float by separating the two
flexible halves of retainer clip,
inserting the float into the clip and
securing it into the base.
EVAPORATIVE WICK
5) Ensure the 1043 Superwick is
installed in the two-part wick retainer
base in the base of the humidifier
6) Position the chassis over the base
frame and press it onto the base
firmly until it is in place.
CAUTION: Ensure the chassis is placed
on the base with the float facing forward
to prevent damage to components.
Loading ...
Loading ...
Loading ...