Loading ...
Loading ...
Loading ...
6 Robert Bosch Hausgeräte GmbH
Cutting discs
Reversible slicing disc –
thick/thin (14)
for slicing fruit and vegetables.
Designation on the reversible slicing disc:
“1” for the thick slicing side
“3” for the thin slicing side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, rolls or chocolate.
Slice boiled, waxy potatoes only when they
are cold.
Reversible shredding disc –
coarse/fine (15)
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
Designation on the reversible shredding disc:
“2” for the coarse shredding side
“4” for the fine shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only.
Chipper disc (16)
For slicing raw potatoes for chips.
Asian vegetable disc (17)
Slices fruit and vegetables into fine
strips for Asian vegetable dishes.
Note:
Attach chipper disc or Asian vegetable disc
with the blade face up.
Discs suitable for further purposes are
available from dealers (see the chapter
“Optional accessories”).
Fig.
Attach the bowl (arrow on bowl on dot on
the appliance) and rotate as far as
possible in a clockwise direction.
Insert drive shaft into the bowl.
Take disc out of the protective cover.
Place disc on disc holder.
Turn required slicing/shredding side face
up. Place disc onto the disc holder such
that the drive couplings on the disc holder
grip into the disc openings. Disc must rest
on the lateral lug of the disc holder.
Lightly rotating, attach disc holder to the
drive shaft.
Attach lid (match arrow on lid on dot
on bowl) and rotate in a clockwise
direction.
Lid lug must be located fully in the slot
in the bowl handle.
Insert pusher and pusher insert.
Insert the mains plug.
Set the rotary switch to the desired
setting.
Fill with contents which are to be sliced
or shredded. When adding contents
which are to be sliced or shredded, apply
only light pressure to the pusher.
Remove the pusher and add ingredients
through the feed tube.
Add long and thin sliced contents by
using the pusher. To do this, remove
pusher insert.
Warning!
Empty the bowl before it becomes so full
that the sliced or shredded contents reach
the disc holder.
Instructions for cutting chocolate:
Add chocolate before switching on the appli-
ance and cover with the pusher.
After switching on the appliance, push down
with the pusher.
After using the appliance
Set the rotary switch to 0/off.
Remove mains plug.
Rotate the lid in an anti-clockwise
direction and remove.
Remove tool:
– Take the tool holder together with
universal blade or kneading hook out
of the bowl. Remove the tools from
the tool holder.
After cleaning the universal blade,
attach the blade guard.
– Remove stirrer from drive shaft.
Take drive shaft out of bowl.
Dismantle stirrer for cleaning (Fig.
).
– Lift the disc holder on the recesses
from the bowl. Take out discs.
Take drive shaft out of bowl.
en
Risk of injury from sharp blades!
Do not grip the sharp blades or edges
of the cutting discs. Take hold of cutting
discs by the edge only.
Risk of injury from sharp blades!
Do not place fingers in the feed tube.
Only use the pusher when pushing down
ingredients.
Loading ...
Loading ...
Loading ...