Loading ...
Loading ...
Loading ...
10
PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
Before first use, remove any packaging
material or promotional labels attached to
your toaster.
1. Insert the power plug into a
220/240 volt power outlet then turn
the power on. The TOAST/CANCEL
button surround will illuminate in white.
The LED toasting progress indicator
will illuminate in red from left to right,
then align to the selected browning
setting (indicated by the position of
the BROWNING CONTROL slide). The
toaster will revert to stand-by mode after
30 seconds if a button is not pressed or
the BROWNING CONTROL slide is
not adjusted.
NOTE
When using the toaster for the first
time, we suggest toasting on the
maximum setting without bread.
The toaster may emit a thin smoke
or distinct odor on initial use. This
is normal and not detrimental to the
performance of the toaster.
2. Place bread, crumpet, fruit bread, bagel
or half an english muffin into toasting
slot. Ensure items for toasting are not
too long or too thick to fit in the
toasting slots.
The BTA825 and BTA830 have a single
BROWNING CONTROL slide and row
of function buttons that simultaneously
control the two toasting slots.
The BTA845 has dual independent
controls allowing each pair of slots
to work independently so you can
simultaneously toast to different
preferences.
3. Select the toast setting by adjusting
the BROWNING CONTROL slide on
the front of the toaster.
The toast settings range from '1' (lightest)
to '5' (darkest). The LED progress
indicator will illuminate in red and align
to the selected toast setting.
NOTE
When using the toaster for the first
time, it is suggested to toast on
browning setting '3'. Various types of
bread and personal preference may
require a different browning setting.
For example, white light-textured
breads may require a lighter setting,
whilst heavier textured breads may
require a darker setting.
4. To start the toasting process, press the
TOAST/CANCEL button on top of the
toaster. The TOAST/CANCEL button
surround will illuminate in red and the
carriage will automatically lower into the
toasting position and start the toasting
cycle. As the carriage automatically
locks into position, the LIFT & LOOK™
button surround will illuminate in white
and the LED toasting progress indicator
(above the selected browning setting)
will flash and start to gradually count
down (towards the left) indicating the
toasting progress.
5. The LIFT & LOOK™ button can be
pressed up until 10 seconds before the
end of the toasting cycle to view the
browning of the bread. When selected,
the LIFT & LOOK™ button surround
will flash and the LED toasting progress
indicator will remain steady (indicating
that the selected browning setting has
not been interrupted by the carriage
rising). The toasting recommences
immediately as the carriage lowers and
locks into position, and as indicated by
the LIFT & LOOK™ button surround
illuminating and the LED toasting
progress indicator flashing.
BTA825_BTA830_BTA845_IB_B13.indd 10 19/04/13 10:50 AM
Loading ...
Loading ...
Loading ...